{"title":"Fixturing","description":"","products":[{"product_id":"serragrip-25","title":"SerraGrip 25 - 25mm Serrated Gripper Jaw (2pcs)","description":"\u003cp\u003eThe SerraGrip 25 is a low profile serrated gripper that offers superior workholding stability during aggressive rough machining compared to traditional smooth clamps\/vice jaws. The low-profile design allows for clamping on as little as 2mm of stock, minimising material removal needed in secondary operations.\u003c\/p\u003e\n\u003cp\u003eDesigned to sit in a 13mm wide slot or pocket and secured with standard M5 fasteners, SerraGrips are easy to integrate into fixture plates, custom pallets, or our standard vice jaw carriers. SerraGrips are available in 25mm, 75mm and 100mm sizes plus our PivotGrip for holding round material.\u003c\/p\u003e\n\u003cp\u003eSerraGrips are made from premium A2 tool steel and hardened to 55HRC. The SerraGrips can clamp on plastic, aluminium, brass, titanium and steel up to 35HRC. Hammering or reseating the material after clamping should be avoided as this may damage the grippers teeth.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Datum Workholding","offers":[{"title":"Default Title","offer_id":50542047789329,"sku":"SG-25","price":21.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0807\/9065\/1153\/files\/SerraGrip25Pair.jpg?v=1774717261"},{"product_id":"serragrip-75","title":"SerraGrip 75 - 75mm Serrated Gripper Jaw (2pcs)","description":"\u003cp\u003eThe SerraGrip 75 is a low profile serrated gripper that offers superior workholding stability during aggressive rough machining compared to traditional smooth clamps\/vice jaws. The low-profile design allows for clamping on as little as 2mm of stock, minimising material removal needed in secondary operations.\u003c\/p\u003e\n\u003cp\u003eDesigned to sit in a 13mm wide slot or pocket and secured with standard M5 fasteners, SerraGrips are easy to integrate into fixture plates, custom pallets, or our standard vice jaw carriers. SerraGrips are available in 25mm, 75mm and 100mm sizes plus our PivotGrip for holding round material.\u003c\/p\u003e\n\u003cp\u003eSerraGrips are made from premium A2 tool steel and hardened to 55HRC. The SerraGrips can clamp on plastic, aluminium, brass, titanium and steel up to 35HRC. Hammering or reseating the material after clamping should be avoided as this may damage the grippers teeth.\u003c\/p\u003e","brand":"Datum Workholding","offers":[{"title":"Default Title","offer_id":50570642784529,"sku":"SG-75","price":41.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0807\/9065\/1153\/files\/SerraGrip75Pair.jpg?v=1774717274"},{"product_id":"serragrip-100","title":"SerraGrip 100 - 100mm Serrated Gripper Jaw (2pcs)","description":"\u003cdiv class=\"flex max-w-full flex-col flex-grow\"\u003e\n\u003cdiv data-message-author-role=\"assistant\" data-message-id=\"7e682638-7f82-4d2b-b6a8-ae7e4a9cdb88\" dir=\"auto\" class=\"min-h-8 text-message flex w-full flex-col items-end gap-2 whitespace-normal break-words text-start [.text-message+\u0026amp;]:mt-5\" data-message-model-slug=\"gpt-4o\"\u003e\n\u003cdiv class=\"flex w-full flex-col gap-1 empty:hidden first:pt-[3px]\"\u003e\n\u003cdiv class=\"markdown prose w-full break-words dark:prose-invert light\"\u003e\n\u003cp\u003eThe SerraGrip 100 is a low profile serrated gripper that offers superior workholding stability during aggressive rough machining compared to traditional smooth clamps\/vice jaws. The low-profile design allows for clamping on as little as 2mm of stock, minimising material removal needed in secondary operations.\u003c\/p\u003e\n\u003cp\u003eDesigned to sit in a 13mm wide slot or pocket and secured with standard M5 fasteners, SerraGrips are easy to integrate into fixture plates, custom pallets, or our standard vice jaw carriers. SerraGrips are available in 25mm, 75mm and 100mm sizes plus our PivotGrip for holding round material.\u003c\/p\u003e\n\u003cp\u003eSerraGrips are made from premium A2 tool steel and hardened to 55HRC. The SerraGrips can clamp on plastic, aluminium, brass, titanium and steel up to 35HRC. Hammering or reseating the material after clamping should be avoided as this may damage the grippers teeth.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Datum Workholding","offers":[{"title":"Default Title","offer_id":50570649731345,"sku":"SG-100","price":49.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0807\/9065\/1153\/files\/SerraGrip100Pair.jpg?v=1774717281"},{"product_id":"pivotgrip","title":"PivotGrip - Round Part Serrated Gripper Jaw (2pcs)","description":"\u003cp\u003eThe PivotGrips are a versatile clamping solution for securely holding round and irregular shaped workpieces. The curved, blade like grippers bite into the workpiece, offering superior stability during rough machining compared to traditional smooth jaws. The low-profile design allows for clamping on as little as 1.5mm of stock, minimising the amount of material removal needed in secondary operations and improving overall cycle times.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ePivotGrips are made from premium A2 tool steel and hardened to 55HRC. The PivotGrips can clamp\u003c\/span\u003e on plastic, aluminium, brass, titanium and steel up to 35HRC in hardness. Individual grippers can also be mounted in custom fixtures and jigs, enabling higher-density workholding of round parts. \u003cspan\u003eHammering or reseating the material after clamping should be avoided as this may damage the grippers teeth.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Datum Workholding","offers":[{"title":"Default Title","offer_id":50570670375185,"sku":"PG-100","price":26.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0807\/9065\/1153\/files\/PivotGrip_Pair.jpg?v=1749546068"},{"product_id":"id-expansion-clamp-press-fit","title":"ID Expansion Clamp - Press Fit","description":"\u003cp data-end=\"460\" data-start=\"200\"\u003eThe ID expansion pins can provide accurate and repeatable internal clamping for milling and general CNC fixturing applications. Designed to locate and secure parts using existing machined holes, it leaves the exterior of the component fully accessible for machining.\u003c\/p\u003e\n\u003cp data-end=\"460\" data-start=\"200\"\u003eFast changeovers can be achieved with just a few turns of a screw for quick clamping and unclamping, helping minimise downtime between cycles. The ID Expansion Clamps are manufactured from hardened steel for optimal durability and service life.\u003c\/p\u003e\n\u003cp data-end=\"712\" data-start=\"462\"\u003eThe lower diameter is sized for a press-fit or close sliding fit into the fixture, the upper section features a small expansion range of 0.1–0.2 mm ensuring precise location while minimising distortion of the workpiece.\u003c\/p\u003e\n\u003cp\u003eMore sizes available on \u003ca title=\"Request\" href=\"https:\/\/datumworkholding.com\/pages\/contact-us\"\u003erequest\u003c\/a\u003e\u003c\/p\u003e\n\u003cp data-start=\"122\" data-end=\"149\"\u003e\u003cstrong data-start=\"122\" data-end=\"149\"\u003eKey Features \u0026amp; Benefits\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli data-start=\"122\" data-end=\"149\"\u003eAccurate and repeatable internal clamping\u003c\/li\u003e\n\u003cli data-start=\"197\" data-end=\"263\"\u003eUses existing holes in machined parts for unobstructed tool access\u003c\/li\u003e\n\u003cli data-start=\"266\" data-end=\"330\"\u003eHardened steel construction for durability and prolonged service life\u003c\/li\u003e\n\u003cli data-start=\"333\" data-end=\"405\"\u003eLower diameter designed for press-fit or close sliding fit into fixtures\u003c\/li\u003e\n\u003cli data-start=\"408\" data-end=\"487\"\u003eSmall expansion range (0.1–0.2 mm) for precise location with minimal part distortion\u003c\/li\u003e\n\u003cli data-start=\"408\" data-end=\"487\"\u003eFast changeover with only a few turns of a screw for clamping and unclamping\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Datum Workholding","offers":[{"title":"6MM","offer_id":56821336899971,"sku":"IDEC-006P","price":7.95,"currency_code":"GBP","in_stock":true},{"title":"7MM","offer_id":57700200120707,"sku":"IDEC-007P","price":10.95,"currency_code":"GBP","in_stock":true},{"title":"8MM","offer_id":56821336932739,"sku":"IDEC-008P","price":12.95,"currency_code":"GBP","in_stock":true},{"title":"9MM","offer_id":57700200153475,"sku":"IDEC-009P","price":13.95,"currency_code":"GBP","in_stock":false},{"title":"10MM","offer_id":56821336965507,"sku":"IDEC-010P","price":13.95,"currency_code":"GBP","in_stock":true},{"title":"11MM","offer_id":57700200186243,"sku":"IDEC-011P","price":13.95,"currency_code":"GBP","in_stock":false},{"title":"12MM","offer_id":56821336998275,"sku":"IDEC-012P","price":13.95,"currency_code":"GBP","in_stock":true},{"title":"13MM","offer_id":57700200219011,"sku":"IDEC-013P","price":14.95,"currency_code":"GBP","in_stock":true},{"title":"14MM","offer_id":57700200251779,"sku":"IDEC-014P","price":14.95,"currency_code":"GBP","in_stock":true},{"title":"15MM","offer_id":57700200284547,"sku":"IDEC-015P","price":15.95,"currency_code":"GBP","in_stock":true},{"title":"16MM","offer_id":56821337031043,"sku":"IDEC-016P","price":15.95,"currency_code":"GBP","in_stock":false},{"title":"17MM","offer_id":62663723581827,"sku":"IDEC-017P","price":17.95,"currency_code":"GBP","in_stock":true},{"title":"18MM","offer_id":62663724007811,"sku":"IDEC-018P","price":17.95,"currency_code":"GBP","in_stock":true},{"title":"19MM","offer_id":62663724663171,"sku":"IDEC-019P","price":18.95,"currency_code":"GBP","in_stock":true},{"title":"20MM","offer_id":62663725711747,"sku":"IDEC-20P","price":18.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0807\/9065\/1153\/files\/IDEC-010_c83717dc-3dc2-45f4-a2d4-64f4a9e2805a.jpg?v=1762860947"},{"product_id":"m12-double-wedge-clamp","title":"M12 Double Wedge Clamp","description":"\u003cul\u003e\n\u003cli\u003eBi-directional expansion holds 2 workpieces with single clamping screw\u003c\/li\u003e\n\u003cli\u003eSlotted mounting hole lets the clamp body float slightly, absorbing small size variations in the parts or material\u003c\/li\u003e\n\u003cli\u003eAvailable in three sizes — M5, M8, M12 — to suit different clamping forces and fixture sizes\u003c\/li\u003e\n\u003cli\u003eM8 and M12 versions add two tapped holes on the clamp face for mounting custom jaws\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003eThe Double Wedge Clamp is a self-adjusting workholding clamp for CNC fixturing where the jaws spread outward, pressing evenly against each part when actuated from a single clamping screw. The slotted screw hole (counterbore) lets the clamp float slightly, taking up small dimensional differences — typically 1-2mm depending on clamp size — without needing to be repositioned.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eOptimised for multi-part fixtures, the Double Wedge Clamp improves the speed of part changeover without sacrificing the stability of a standard machine vise. The clamp can also be used in a single-part configuration with an equally spaced backstop on the fixture side. M8 and M12 sizes feature two tapped mounting holes on each jaw face, letting you bolt on custom soft jaws for part-specific contours.\u003c\/p\u003e","brand":"Datum Workholding","offers":[{"title":"Default Title","offer_id":62522012369283,"sku":null,"price":56.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0807\/9065\/1153\/files\/M12DoubleWedgeClamp.jpg?v=1788355413"},{"product_id":"m8-double-wedge-clamp","title":"M8 Double Wedge Clamp","description":"\u003cul\u003e\n\u003cli\u003eBi-directional expansion holds 2 workpieces with single clamping screw\u003c\/li\u003e\n\u003cli\u003eSlotted mounting hole lets the clamp body float slightly, absorbing small size variations in the parts or material\u003c\/li\u003e\n\u003cli\u003eAvailable in three sizes — M5, M8, M12 — to suit different clamping forces and fixture sizes\u003c\/li\u003e\n\u003cli\u003eM8 and M12 versions add two tapped holes on the clamp face for mounting custom jaws\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003eThe Double Wedge Clamp is a self-adjusting workholding clamp for CNC fixturing where the jaws spread outward, pressing evenly against each part when actuated from a single clamping screw. The slotted screw hole (counterbore) lets the clamp float slightly, taking up small dimensional differences — typically 1-2mm depending on clamp size — without needing to be repositioned.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eOptimised for multi-part fixtures, the Double Wedge Clamp improves the speed of part changeover without sacrificing the stability of a standard machine vise. The clamp can also be used in a single-part configuration with an equally spaced backstop on the fixture side. M8 and M12 sizes feature two tapped mounting holes on each jaw face, letting you bolt on custom soft jaws for part-specific contours.\u003c\/p\u003e","brand":"Datum Workholding","offers":[{"title":"Default Title","offer_id":62522158088579,"sku":null,"price":41.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0807\/9065\/1153\/files\/M8DoubleWedgeClamp.jpg?v=1788357144"},{"product_id":"m5-double-wedge-clamp","title":"M5 Double Wedge Clamp","description":"\u003cul\u003e\n\u003cli\u003eBi-directional expansion holds 2 workpieces with single clamping screw\u003c\/li\u003e\n\u003cli\u003eSlotted mounting hole lets the clamp body float slightly, absorbing small size variations in the parts or material\u003c\/li\u003e\n\u003cli\u003eAvailable in three sizes — M5, M8, M12 — to suit different clamping forces and fixture sizes\u003c\/li\u003e\n\u003cli\u003eM8 and M12 versions add two tapped holes on the clamp face for mounting custom jaws\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003eThe Double Wedge Clamp is a self-adjusting workholding clamp for CNC fixturing where the jaws spread outward, pressing evenly against each part when actuated from a single clamping screw. The slotted screw hole (counterbore) lets the clamp float slightly, taking up small dimensional differences — typically 1-2mm depending on clamp size — without needing to be repositioned.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eOptimised for multi-part fixtures, the Double Wedge Clamp improves the speed of part changeover without sacrificing the stability of a standard machine vise. The clamp can also be used in a single-part configuration with an equally spaced backstop on the fixture side. M8 and M12 sizes feature two tapped mounting holes on each jaw face, letting you bolt on custom soft jaws for part-specific contours.\u003c\/p\u003e","brand":"Datum Workholding","offers":[{"title":"Default Title","offer_id":62522169950595,"sku":null,"price":23.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0807\/9065\/1153\/files\/M5DoubleWedgeClamp.jpg?v=1788357286"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0807\/9065\/1153\/collections\/SerraGrip_25_Pair_91272a60-ccfb-41e5-b70b-c5481e8cb5ec.jpg?v=1773320094","url":"https:\/\/datumworkholding.com\/collections\/fixturing.oembed","provider":"Datum Workholding","version":"1.0","type":"link"}